Data of DRESSLER 2m EME RF Linear Amplifier
Frequency bands | 144 MHz – 146 MHz | |||
Power supply | 2 power supply transformers | 2400 VA & 200 VA | ||
Plate voltage | 3250 | V | at full output power | |
Screen voltage | 330 | V | stabilized | |
Grid voltage | - 57 | V +/- 15 V | regulated | |
Filament | 6 | V / 9 A | ||
Input SWR | 144 | – 146 MHz | 1 : 1 | |
Gain | 19.5 dB | |||
Amplification | Input power | Output power | ||
Measured with a Bird Power Meter, Model 43, on Bird dummy load. | 5 W 10 W 20 W 25 W |
460 W 900 W 1800 W 2200 W |
||
Input SSB Signal | 33% of full 1 KHz Modulation on / off Ratio 1:2, Interruptions: 20 Hz |
|||
Harmonic Output | 50 dB below rated output | |||
IMD | 35 dB or better | |||
Tube | Eimac 4CX1000A | |||
Tuned input network | ||||
Output network | Lambda/4 system, impedance: 40 Ohm (best possible value!) | |||
Computer control | All switching functions, no relais switching under power conditions, soft start inrush, 200 sec delay time for full power, 2 speed turbine
blower Well regulated screen and grid supply for +ve and -ve currents as well as current limiting to protect the tube and minimize the IMD. It is impossible to override the screen and grid dissipation at any working conditions. |
|||
Metering | Display of all parameters – no switching | |||
Housing | High quality black eloxial aluminia | |||
Dimension (PA & PS) | each: 324w x 205h x 430d mm³ | |||
Weight (PA & PS) | combined: 48 kg |